All rights reserved. No part of the publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior permission of the copyright owner.
Durston Rolling Mills - British Made - In use Worldwide - Registered British Design
Home About Us New Products Products News Product Videos Brochure FAQ Contact Us
FAQ

Bangle Forming Die Set

Innovative product manufactured by Durston and designed by  TWJ. Effortlessly form bangles and cuffs both flat and  anticlastic in minutes! Hardened and ground to a high polish with minimize finishing. Unique quick change carrier rod fits rigid in all size vices. Forming mallets available to fit all dies - will not damage  textures or patterns. Our high quality Vice can be used for your bangle forming die  set or any other use you may have for it. 100mm wide jaws  and will open up to 120mm. 

Best Viewed - Zoom in (ctrl +) Zoom out (ctrl -)

Super Power Ringer

No need for handpiece. Coils up ring with great ease. Low horse power motor. Simply insert wire and press the button. Lay coils in coil holder and simply push. Cuts hundreds of coils in seconds! You can make coil lengths as long as 300mm. Variable speed motor. Power Ringer Sizes: 610x320x240. (700x380x300 Boxed) Weights: Net 28.6kg. Gross 32kg
+44 (0)1494 535388
sales@durston.com
Established Since 1961
Follow us on Facebook

Polishing Machine

We offer a variety of models to meet all our customers needs  tailored to the individual market. We provide both Euro styled  machines and US styled machines. All our models are built from 1.5mm (15 gauge) steel, rather  than 1mm (18 gauge) steel traditionally used on other  polishing machines today. This is to create strong, reliable  machines Durston are so well known for. Filters can conveniently be removed from the side, this will  then not take valuable storage space on top of the machine.  We offer both 115V or 230V for our machines.

Superior Workbench

The Ultimate Jewellers bench. Weighing in at 91kg  This Durston Superior Workbench has been crafted from solid  premium Oak and is the perfect addition to a jeweller's  workshop. The heavy duty workbench accommodates six  graduated drawers and a high railing surrounding the durable  oak work top, preventing anything falling off. This sturdy  bench features a large centre tray, designed for you to easily  catch and remove small material.   Above is an additional work tray with a curved cut out area,  enabling you to comfortably work up close to your jewellery  pieces. There is an extra centre drawer for your most used  tools or findings and a centre mounted bench pin slot. To  ensure you are always comfortable in the workshop, this bench  also uniquely features a supportive footrest.

DRM 130 RE Rolling Mill

Constructed from cast iron for optimal strength and rigidity;  our mills feature 130mm steel flat rollers manufactured to the  finest quality and additional high quality extension rollers with  four half round grooves. They also feature various elements  such as, self lubricating maintenence free bearings, high  efficient 5-1 gear box, hardened ground rolls, and large, easy  to read calibrated discs.  We can also supply them without a reduction gearbox. For all  enquires please feel free to contact us at md@durston.com.  R  - Reduction gear box E - Extension rollers

Student Plus Workbench

This Durston Jewellers Student Workbench has been crafted  from Hevea Brasiliensis, an eco-friendly hardwood and is the  perfect addition to a student, hobbyist or beginners workshop.  The affordable, robust workbench accommodates a wooden  railing around the 20mm thick work top, curved cut out area  and arm supports, enabling you to comfortably work up close  to your jewellery pieces.   There is a centre mounted bench pin slot and a wooden bench  pin included. – and in addition there are 2 different size  working holes. This great value bench also features a 280mm x 100mm x  20mm tool holder to effectively organise your tools and  supplies. Comes in multitransit packaging so it arrives at your door safe and secure.

TUI 130 DSP Power Mill

Constructed from cast iron for optimal strength and rigidity;  our TUI Power Mills are manufactured from the finest quality  materials to produce robust components and durability.  Powerful enough for continuous operation, this is why our mills  have such a long lifetime! Incorporates all the same features  as our existing models such as, the actual mill, rolls and  casting gears however there are several differences, which are  as follows:  Aluminium gear box (traditionally used by other manufacturers). Plate and main guard made of steel rather than cast iron. One central emergency stop button.
Constructed from cast iron for optimal strength and rigidity; our 130mm power mills are manufactured from the finest quality materials to produce robust components and durability. Powerful enough for continuous operation, this is why our mills have such a long lifetime! They also feature various elements such as, high quality extension rollers with four half round grooves, operational variable speed, Powerful 1.1kw motor, forward and reverse motion, highly efficient near silent operation, Work lights available as an optional extra! Our power mills also have a range of safety features fitted into our systems, for example, emergency stop button, safety guards and bars at the front.

DRM 130 Power Mill

Airmax 2200

Durston are pleased to introduce our new super clean, fully  enclosed, healthy, safe, powerful extraction polishing  machine. Developed over the last 12 months, the machine  has gone through vigorous testing and trials.

Agile 130

The all new Agile 130 is a special addition to the range of  Durston Rolling Mills, coming from the same stable as the DRM  C130RE. It's lighter – by having thinner frames – but where the  mill really needs its strength it's fully designed to support the  load without any compromise on quality.  A traditional T-bar replaces the hand-wheel and you'll find 5  half-rounds as part of the main roller. There are 11 square  grooves (same as the DRM C130 but included is 5 half rounds 6, 5, 4, 3 and 2mm – and still a huge 60mm of flat area. The rolls  are specially induction hardened to sixty-four RC. The main  barrel to a depth of 6mm ensuring your rolls last a life time.  The Agile 130's bearing blocks are fully supported, which is  important to give the best possible rolled finish. The bearings are self-lubricating and completely maintenance-  free... while the beautifully formed square grooves have been  specifically designed to produce the best possible rolled finish. 

Disc Cutter Set - Product Demonstration

Disc Cutter Set - Product Introduction

After the successful launch of our new disc cutter in 2012, we are pleased to introduce our new tray design. Our unique tray is  positioned in a slanted position to slide out with ease. Now cut  discs from 3mm to 34mm in 1mm increments. The punches are  made from special tool steel, hardened and ground at perfect  angle for great results.  Accessories Included With Disc Cutter: Urethane pad to absorb energy of hammer blow. Durston specially formulated lubricant to increase life of  punches. Set of shims to level up when punching holes. Unique plastic tray that has separate holder to hold all the  punches. Spring loaded die plate allows easily clamping of material.  Center positioning dies now available as extra. 
After the successful launch of our new disc cutter in 2012, we are pleased to introduce our new tray design. Our unique tray is  positioned in a slanted position to slide out with ease. Now cut  discs from 3mm to 34mm in 1mm increments. The punches are  made from special tool steel, hardened and ground at perfect  angle for great results.  Accessories Included With Disc Cutter: Urethane pad to absorb energy of hammer blow. Durston specially formulated lubricant to increase life of  punches. Set of shims to level up when punching holes. Unique plastic tray that has separate holder to hold all the  punches. Spring loaded die plate allows easily clamping of material.  Center positioning dies now available as extra. 

Ring Stretcher Tools

High precision ring stretcher/reducer featuring an 6 spine  mandrel and 16 polished countersunk dies. This high quality  ring stretcher ensures exceptionally accurate ring sizing. Its  countersunk polished steel reducing plate will reduce bands up  to 12mm wide. Heavy duty cast iron constructed with hardened steel shaft  will bend up to 4mm thick, includes 2 precision hardened and  ground dies for durability and strength. 

Professional Wooden Workbench

This Durston Jewellers professional bench has been crafted  from hardwood and is the perfect addition to a professional  workshop. This affordable robust workbench accommodates a  wooden railing around the work top, curved cut out area and  arm supports, enabling you to comfortably work up close to  your jewellery pieces.   There is a centre mounted bench pin slot and a wooden bench  pin included. – and in addition there are 2 different size  working holes. Also includes 3 side drawers, a slide out centre tray with cut  out area and includes a rear shelf. Large central drawer with  steel base.

Euro Polishing Machine

We offer a variety of models to meet all our customers needs  tailored to the individual market. All our models are built  from 1.5mm (15 gauge) steel, rather than 1mm (18 gauge)  steel which is used on other polishing machines today. This is  to create a strong, sturdy construction which Durston are so  well known for.  Filters can conveniently be removed from the side, this will  then not take valuable storage space on top of the machine.  We offer both 115V or 230V for our machines.

The Ringer - Product Demonstration

This is the ultimate Ringer! Special features include the following: Coil holder with screws to bolt down to your bench for safety. Two different size V’s Grooves in Coil Holder. Increased mandrel length (120mm long) and increased coil holder length. High stem coiler enabling more room for your hands. Coil winder can be bolted anywhere to your bench or to the tray provided. 20 mandrel sizes. Compact base measures 110 x 185 x 155 high. Durston lubricant and 1 blade supplied as standard Suitable fo both Dremel and Foredom flexshafts.
Product Videos